Hornady One Shot Gun Cleaner and Dry Lube Review

Hornady One Shot Gun Cleaner, Spray Case Lube and TAP HD-Extreme

By Gary Zinn

Image courtesy of Hornady Mfg. Co.

Hornady (www.hornady.com) is probably best known for their bullets and reloading tools. Notwithstanding, they likewise market a line of useful cleaning and lubricating products. Three of these with which I have extensive experience are their One Shot Gun Cleaner with Dyna Glide Plus, One Shot TAP Hd-Farthermost and Spray Case Lube.

One Shot Gun Cleaner with Dyna Glide Plus

I take been using this product for over a decade and it has never permit me down. The tin is labeled "Gun Cleaner and Dry Lube," which well describes its capabilities. I use it routinely for quick cleaning and lubing of gun bores and actions, and for wiping off and protecting barrels and receivers.

For instance, One Shot and a Hoppe'due south Diameter Snake take become my sole tools for routine maintenance of my Ruger 10/22 rifles. To clean a bore, I make three passes with the Bore Snake. For the kickoff laissez passer, I spray One Shot on the bristle area of the Bore Snake and draw it through the barrel. I make a second laissez passer with the Bore Snake dry and and so a 3rd pass with One Shot sprayed on the tail of the ophidian. Upshot: a clean bore every time.

To make clean a x/22 activity, I spray a liberal dose of Ane Shot into all parts of the receiver, including around the commodities, into accessible areas of the trigger group and on the mag release mechanism. I cycle the bolt a few times, wipe any remainder off with a paper towel and phone call it done. I have non had to remove the bolt or trigger grouping for a more in-depth cleaning in years.

The x/22 rotary magazines become the One Shot treatment, too. Whenever needed, I spray it into a magazine, shake the magazine around a bit, and then shake out and wipe off any residue. This keeps the mags running smoothly.

Finally, I spray some One Shot on a paper towel and wipe it on the barrel and receiver. This both cleans the metallic and leaves a dry protective blanket. If at that place is an easier way than this to maintain a .22 rimfire rifle, I want to hear virtually it.

This product comes in five and 10 ounce spray cans. I ever deport a five ounce can in my range bag and have a 10 ounce tin can on my workbench. The five ounce can (SKU 9990) has a MSRP of $11.17, while the 10-ounce (SKU 99901) MSRP is $17.79.

1 Shot TAP HD-Extreme

TAP HD is an enhanced version of the cleaner/dry lube discussed to a higher place. Anyone who wants to know the differences tin read the product descriptions on the Hornady website, so I will not get into that here.

I apply TAP Hd mainly to keep my autoloading pistols and revolvers running well. Over the years I have tried various greases, oils and sprays to proceed autoloader slides and revolver cylinders running gratis. TAP HD is better than anything else I accept used.

The abiding issue with using grease or oil to keep a handgun running is that both collect shooting residue, which necessitates frequent cleaning and relubrication. I detect that this problem is greatly lessened when I use TAP Hard disk drive. I spray information technology on the activeness springs and rails of autoloaders and around the cylinder axles of revolvers and they run complimentary for extended periods without collecting much residual.

I also use the TAP Hard disk for full general handgun maintenance, including cleaning and lubricating firing mechanisms and magazines. It works well on the outside of autoloader barrels and equally a cleaner/protectant on all handgun metal surfaces, internal and external. Information technology will serve for basic bore cleaning, too, used with a Diameter Serpent or a cleaning rod and patches. TAP Hard disk comes in five ounce spray cans (SKU 99936) at a MSRP of $12.55.

Other Uses

I likewise use these products for general cleaning and protection of centerfire rifles and shotguns. I take quit using gun oil on barrels and receivers, since either of these Ane Shot products does a better job of protecting the metallic than oil, with no clay-collecting film. I also use them to clean and lubricate the bolts and raceways of my bolt action rifles, along with the actions of lever rifles and pump shotguns.

If I look that I might demand to practise a bones diameter cleaning of a rifle or shotgun at the range or in the field, I have along the advisable Diameter Snake or cleaning rod, jags, patches and apply them with I Shot to do a quick task.

Nevertheless, I do non recommend using Ane Shot equally the sole solvent for cleaning the bores of centerfire rifles, handguns and shotguns. This is because Ane Shot is not designed to break downwardly heavy copper or lead fouling in barrels, which may exist expected to occur with shooting high velocity or high pressure ammunition. The same goes for plastic shot loving cup fouling in the bores of shotguns. When significant copper, lead, or plastic fouling is an issue, use diameter cleaning solvents designed to bargain with these.

Spray Case Lube

Hornady Ane Shot Spray Case Lube is designed for use when resizing bottlenecked cartridge cases for reloading. In my experience, it is a very desirable alternative to sizing waxes or creams that must exist manually applied case by case, because information technology is quicker, less messy and more consistent in performance.

To employ the Spray Case Lube, I start with cases that have been deprimed and cleaned in a vibrating case cleaner. I place them in a shallow loading block, which I assault some wrapping paper or butcher paper to grab overspray. I milkshake the can of example lube very thoroughly. Then, I spray it lightly over all sides of the block of cases, holding the tin somewhat above the level of the cases and angling the spray downward and so that some will go on the inside of the example mouths, also as uniformly around the outsides of the cases.

After spraying, I let the cases dry out for five to 10 minutes and then resize them. I am not a truly high volume reloader, but my records show that I have loaded over 2000 rounds full of .223 Remington, .260 Remington, .308 Winchester and 8x57 Mauser ammo using this sizing method. I accept non had a single instance of a stuck case, dented case shoulder, or plain-featured case neck. I use a RCBS 10-Dice for the .223 Remington and Lee dies for the other calibers.

Besides the ease of application and trouble free results I have had with the Spray Example Lube, I also like information technology because in that location is no demand for post-sizing cleanup. This is non true if one uses a wax or cream sizing lube, for the cases must be wiped individually or run through a vibrating case cleaner to remove the residue on them.

Some people swear by this production, while others swear at information technology. Obviously I autumn into the first group. I do two things when using the Hornady One Shot Spray Case Lube that I believe help avoid some of the issues that others have claimed they encountered. First, I utilise just plenty lube to get a low-cal, fifty-fifty coverage all effectually the case bodies, but I carefully avert dousing them.

Second, I make sure that the inside of my dice is clean before I begin resizing a batch of cases and then I clean it again when I have finished. With what exercise I pre- and postal service-make clean my sizing dies? Hornady I Shot Gun Cleaner and Dry Lube, of grade. Hornady One Shot Spray Case Lube comes in v ounce cans (SKU 9991), with a MSRP of $xi.17.

Conclusion

I have found these iii products very useful in the indicated applications. If you lot have not tried them, I suggest that they are worth at least one shot.

cofieldpreclaid.blogspot.com

Source: https://www.chuckhawks.com/hornady_one_shot.html